Feature:

1: Set clear screen display with operating prompts

2 : Designed for home security can freely Association .

3 : Minimum setting time of 1 minute , maximum setting time of a week.

4 : high conductivity copper , nickel plated , anti- rust, heat smaller, copper structural optimization and longer life.

5 : Housing made of imported PC material flame retardant, so that higher product safety

6.Most adequate materials , longest life , lowest repair

7.The built- in rechargeable battery as a backup power supply in case of power from the mains , and still maintain the timing of the display and storage of data up to six months or more

8.With rechargeable battery , charging plug can

9.Applications: rice cookers , water dispensers, heaters, liquid electric mosquito coils and other electrical appliances, electric vehicle batteries , digital camera batteries , cell phone battery, home security , etc.

Description:

Material: ABS + PC

Plug Type: EU Plug

Installation: Plug-in Type

Voltage: 220-240V 50Hz

Rating: 230V AC/10A/2300W

Operating Temperature: -10-55 Celsius

Accuracy: ±1 Min / Mon.

Size: approx. 11.5*6*3.4cm

Color: White

Applied voltage : 250VAC

Switching capacity : 10A

Maximum load : 2300W

Note:This EU Plug is only available in Germany, Austria, Spain, Switzerland, the Netherlands, Finland, Poland, Denmark, Norway, Belgium, Portugal, Hungary, Russia and other countries.

Include:

1 x Timer Switch

SETTING PROGRAMS 

1.Press the PROG button and release. The first on setting can be made now. 

2.Press WEEK button to set the day or blocks of days. Set the time by pressing the HOUR button and then MIN button. 

3.Press the PROG button again to finish the first on setting and enter into the first off setting.By repeating 2 to make the first off setting 

4.Press the PROG button again to finish the first off setting and enter into the 2 on setting.Repeat 2 and 3 to program remaining settings. 

5.After completing settings,Press the CLOCK button and the timer is ready to operate. 

Example: timer on at 18:15 and timer off at 22: 15 everday. 

a. Press PROG and LCD displays 1 ON 

B. Press WEEK till LCD displays "MO,TU,WE,TH,FR,SA, UP 

C.Press HOUR to LCD displays 18: 00 

D.Press MIN to LCD displays 18: 15. 

e. Press PROG again and LCD displays 1 OFF 

f.Repeat the above c. and d. till LCD displays 22: 15 

g.Press the button "RES/RCL" to stop some programs,press the button" RES/RCL" again to recall the selective programs. 

TIP: When verifying your programs ensure that the settings do not overlap,especially when using the block option

MANUAL ON/AUTO/MANUAL OFF SETTING

1.Press ON/AUTO/OFF button to revert the three mode in turn. 

2.In ON or OFF mode the TIMER doesn't operate as settings in AUTO mode. 

3.Press ON/AUTO/OFF button turn to AUTO,Timer will run by setup program.

SPECIFICATIONS

Voltage See marking plate

Max Load See marking plate

Operating temperature 0'C to +40C

Battery backup Ni-Mh 1.2V

Ставку робіть лише за умови, що Ви уважно прочитали опис лота та сторінку "Про мене" , згодні з умовами оплати, доставки, та даний лот Вам потрібен.

Покупець першим виходить на зв"язок.

Неоплата протягом тижня приводить до негативного відгуку.

Реквізити для оплати Ви отримаєте автоматично у листі від SkyLots з темою "...Вы совершили покупку..."